High-performance fenestration products manufactured to international structural, acoustic, and thermal compliance standards.
Evaluating structural integrity, thermal transmittance (U-factor), air infiltration dynamics, and counter-balance mechanical systems for high-volume commercial supply.
Single-hung windows feature a stationary upper sash integrated directly into the master frame, paired with an operable bottom sash. Because the upper sash is permanently sealed, single-hung systems achieve exceptionally low air infiltration ratings (often tested under ASTM E283 at < 0.10 CFM/ft²). By reducing the perimeter weatherstripping interface by 50% compared to dual-operable configurations, structural rigidity under wind pressure (ASTM E330) is maximized. This makes single-hung units the primary choice for cost-conscious, energy-efficient multi-family developments and high-wind coastal residential projects.
Double-hung windows utilize two vertically sliding sashes, allowing both top and bottom sashes to operate independently. This architecture creates natural convective airflow: cooler air enters through the bottom aperture while warm, buoyant air exhausts through the upper opening. High-specification double-hung systems incorporate heavy-duty tilt latches and constant-force coil spring balance mechanisms rated for over 20,000 operational cycles. Furthermore, inward-tilting sashes simplify exterior maintenance in elevated multi-story buildings, proving indispensable for urban institutional and high-end residential applications.
When specifying fenestration systems for LEED-certified commercial projects or zero-net-energy buildings, window selection directly impacts HVAC sizing calculations. Below is a comparative baseline engineered by Jiangsu Guoxin Glass Co., Ltd. for structural contractors and architects.
| Performance Parameter | Single-Hung Profile (Thermal Break Aluminum) | Double-Hung Profile (Thermal Break Aluminum) | Industry Standard Compliance |
|---|---|---|---|
| Thermal Transmittance (U-Factor) | 0.24 - 0.28 BTU/hr·ft²·°F (Double Low-E) | 0.26 - 0.30 BTU/hr·ft²·°F (Double Low-E) | NFRC 100 / ENERGY STAR 7.0 |
| Solar Heat Gain Coefficient (SHGC) | 0.18 - 0.35 (Customizable Coating) | 0.18 - 0.35 (Customizable Coating) | NFRC 200 |
| Air Infiltration Rating | < 0.08 CFM/sq ft @ 1.57 psf | < 0.12 CFM/sq ft @ 1.57 psf | ASTM E283 / AAMA 101 |
| Water Penetration Resistance | 8.25 psf (Passes 400 Pa static) | 7.50 psf (Passes 360 Pa static) | ASTM E331 |
| Sound Transmission Class (STC) | STC 32 - STC 42 (with SGP Laminated Glass) | STC 30 - STC 40 (with PVB Laminated Glass) | ASTM E90 / ASTM E413 |
| Structural Design Pressure (DP) | DP50 to DP80 (HVHZ Coastal Rated) | DP45 to DP70 (Standard & Heavy Commercial) | ASTM E330 / AAMA CW Class |
Strategic macroeconomic insights driving procurement requirements across North America, Europe, Australia, and emerging global urban centers.
In the United States and Canada, strict building envelope regulations (such as California Title 24 and IECC 2024 mandates) are accelerating the replacement of legacy single-pane windows with thermally broken aluminum single-hung and double-hung units. Multi-family housing developers heavily prioritize bulk procurement of factory-finished units integrated with triple-insulated, low-emissivity glass to achieve high energy ratings without inflating structural framing budgets.
European architectural specifications demand stringent overall U-values ($U_w \le 0.8 \, W/m^2K$). Achieving these standards requires combining high-precision thermal break aluminum profiles with specialized Low-E insulating units containing warm-edge spacers and inert argon gas fills. Suppliers must deliver non-compromising structural integrity while satisfying rigorous EN 14351-1 CE marking standards.
Coastal developments in Florida, the Caribbean, and Southeast Asia face severe hurricane activity and extreme dynamic wind pressures. International B2B buyers require single and double-hung window suppliers to supply structural framing tested under High-Velocity Hurricane Zone (HVHZ) protocols, paired with SGP (SentryGlas®) laminated safety glass capable of resisting severe missile impact tests.
Leveraging two decades of advanced material processing, automated production lines, and direct source pricing for global wholesalers and contractors.
Founded in 2006, Jiangsu Guoxin Glass Co., Ltd. has scaled into a premier source enterprise specializing in structural architectural glass, aluminum windows, and high-security door systems. Unlike standard window assemblers who outsource glass units, Guoxin maintains full internal control over raw glass cutting, CNC edge grinding, automated tempering, Low-E magnetron sputtering, double-sealed insulating unit assembly, and aluminum extrusion thermal breaking.
This complete operational footprint eliminates middleman markups, reduces turnaround lead times by up to 35%, and guarantees strict compliance with global engineering specifications. Whether fulfilling OEM orders for custom architectural fenestrations or supplying standard double-hung profiles, our facility guarantees zero-defect quality management.
Every batch of single hung and double hung windows manufactured at our facility undergoes stringent testing protocols: water tight integrity testing under static pressure, hardware cycle endurance checks, structural load testing, and optical distortion checks across triple-pane configurations.
Precision alloy 6063-T5/T6 extrusions with reinforced PA66-GF25 polyamide thermal barrier strips for superior energy efficiency.
Dual-seal structural silicone sealant lines with automated argon gas filling to ensure hermetic sealing and fog-free lifespan.
Customized steel-reinforced wooden crate packaging engineered to withstand ocean transit forces and facilitate efficient site unloading.
Unlocking unprecedented thermal, structural, optical, and acoustic performance by integrating specialized glass substrates into vertical hung window frames.
For hurricane zones and forced-entry deterrence, single-hung and double-hung sashes can be glazed with SGP (SentryGlas®) interlayers. SGP is 5 times tougher and up to 100 times stiffer than standard PVB interlayers, retaining structural integrity even if both glass panes are fractured under violent wind gusts.
Transforming conventional windows into dynamic privacy partitions, polymer-dispersed liquid crystal (PDLC) technology allows users to switch glass from opaque to clear in milliseconds via electrical current. Ideal for modern commercial office spaces, luxury residences, and executive boardrooms.
engineered fire-rated ceramic and gel-filled glass configurations offer certified thermal radiation barrier protection for 30 to 120 minutes. Designed to meet strict building safety codes in commercial fire escape paths and industrial facility envelopes.
Discover how Jiangsu Guoxin Glass Co., Ltd. delivers structural glass and aluminum fenestration solutions to iconic architectural structures around the world.
Standing as the 7th tallest building in the world, this 89-story architectural marvel utilized our high-performance insulated curtain wall glass systems to achieve optimal thermal regulation, seismic load deflection, and solar glare reduction across thousands of exterior glazed panels.
Processing over 120,000 daily passengers, Wuxi Station required extreme acoustic insulation and structural safety. Guoxin supplied thousands of customized laminated glass panels for elevated concourses, reducing ambient train noise while guaranteeing high impact resistance.
Recognized as the world's largest teapot-shaped structure (38.8 meters high), this project featured custom-curved, individually sized aluminum frame glass panels and artistic stained glass domes engineered to millimeter tolerances by our technical team.
Featuring large-span reflective insulated glass facades that integrate whole-building solar control with modern automotive aesthetic transparency, minimizing operational HVAC expenditures for premier commercial automotive centers.
Our single hung windows, double hung systems, and structural glass solutions are actively imported and deployed across major global markets, including: The United States, Canada, Australia, New Zealand, Germany, France, Britain, Italy, Spain, Portugal, Finland, Sweden, Norway, Japan, Mexico, and Peru.
Essential engineering criteria for procurement directors, importers, and glazing contractors when submitting custom RFQ requests.
Specify extruded aluminum alloy grades (6063-T5 for standard profiles, 6063-T6 for high-load commercial spans). Finishing options include Fluorocarbon PVDF coating (> 40 microns for coastal resistance), Anodizing (Class I 18+ microns), or Electrostatic Powder Coating in custom RAL colors.
Define glass pane configurations: Dual-pane insulated (6mm + 12Ar + 6mm), Triple-pane acoustic (5mm + 9Ar + 4mm + 9Ar + 5mm), or Structural SGP Laminated (6mm + 1.52SGP + 6mm Low-E). Specify soft-coat Low-E surface positioning (Surface #2 or Surface #3) based on local solar zones.
Determine counter-balance mechanisms according to sash weight: Heavy-duty block & tackle balances, spiral balances, or constant-force spring balances. Integrate multi-point stainless steel 304 locking hardware and flush-mount sweep latches for optimal security ratings.
Detailed technical answers for architectural designers, wholesalers, and structural engineering teams.
Single hung windows possess a permanently fixed upper sash, providing greater structural rigidity, higher design pressure (DP) ratings, and lower overall air infiltration because there are fewer dynamic weatherseal joints. Double hung windows feature two operable sashes, allowing dual-way ventilation and tilt-in exterior glass cleaning, which is advantageous for residential multi-family towers where exterior window washing access is restricted.
Aluminum is a highly conductive material. To prevent exterior heat or cold from transferring into the building interior, our thermal break frames introduce a non-conductive Polyamide (PA66-GF25 reinforced with 25% glass fiber) structural strut between the inner and outer aluminum extrusions. This breaks the heat path, lowering frame U-values dramatically to meet ENERGY STAR and passive house standards.
Yes. We integrate laminated architectural safety glass using Kuraray SGP (SentryGlas®) or high-tensile PVB interlayers within reinforced aluminum sash profiles. These assemblies pass ASTM E1886/E1996 large missile impact testing and withstand cyclic pressure loads up to DP80, making them fully compliant for coastal hurricane-prone regions.
Standard double-pane insulated glass delivers an STC rating around 28 to 32. By utilizing asymmetrical glass pane thicknesses (e.g., 6mm exterior + 12mm argon spacer + 8.76mm laminated interior pane), acoustic resonance is disrupted, raising performance to STC 38–42, effectively blocking urban road traffic, railway, and airport low-frequency noise.
We utilize heavy-duty constant force stainless steel coil spring balances and block-and-tackle balance cartridges calibrated to the precise weight of the insulated glass packet. This ensures smooth fingertip operation requiring less than 5 lbs of operating force while maintaining sash positioning at any height.
Direct factory sourcing eliminates distributor markups (saving 25–40% on material costs). Because Jiangsu Guoxin operates raw glass processing and aluminum assembly under one roof, production schedules are tightly controlled, container loading efficiency is maximized, and custom oversized dimensions can be engineered without prohibitive custom tooling fees.
We supply single, double, and triple-silver vacuum magnetron sputtered Low-E coatings. In warm climates requiring intense solar rejection, our Low-E coatings deliver an SHGC as low as 0.18 while preserving visible light transmittance (VLT > 65%). In cold climates, high solar gain Low-E coatings capture passive solar thermal radiation to lower winter heating expenses.
Standard OEM production lead time is 20 to 30 calendar days following shop drawing approval and deposit confirmation. Flexible MOQs are available depending on frame customization and glass configuration, ranging from full 20ft/40ft container loads for multi-unit commercial developments to smaller project-specific batches.
Our IGUs utilize warm-edge polymer spacers packed with 3A molecular sieve desiccant to absorb any internal moisture vapor. Primary sealing is executed with polyisobutylene (PIB), followed by a heavy secondary seal of structural silicone or polyurethane. This dual-seal barrier prevents gas leakage and carries a 10-year warranty against internal fogging.
Yes. Single and double hung master frames can be extruded with dedicated screen tracks to house removable fiberglass insect mesh, stainless steel 304 security mesh (crimsafe style), or retractable roll-up screen cassettes without interfering with sash operation or tilt latches.
Explore our full catalog of high-performance architectural fenestration, specialty glass, and window systems.
Guoxin
